SMP and SMPM Spring Bullets

Picture for category SMP and SMPM Spring Bullets

SV Microwave’s SMP and SMPM spring bullets guarantee maximum RF performance by eliminating gaps between the bullet and shroud during gang mating. Additionally, these spring loaded bullets have been designed for repeatable VSWR performance under all states of compression by solving radial misalignment issues when fully mated.

Features / Benefits: 

  • Eliminates gaps between bullet and shroud for maximum RF performance
  • Wide range of available sizes
  • Performance guaranteed under all states of compression
  • DC - 40 GHz

Applications:

  • Mil-Aerospace
  • High density, small form factor
  • Board to board with multiple simultaneous mates
  • Large scale blind mate arrays

SMP

Impedance (Ω)50
Frequency GHz40 GHz
Shielding Effectiveness≥ -80 dB DC - 3 GHz
 ≥ -65 dB 3 - 26.5 GHz
Dielectric withstanding Voltage500 VRMS
Mating Cycles - SB1000
Mating Cycles - LD500
Mating Cycles - FD100
Insertion Force - SB3.0 lbs
Insertion Force - LD5.0 lbs
Insertion Force - FD7.0 lbs
Withdrawal Force - SB0.5 lbs
Withdrawal Force - LD7.0 lbs
Withdrawal Force - FD9.0 lbs
Axial Misalignment.010” Max
Radial Misalignment3° Max
Temperature Rating-65°C to +165°C
Corrosion (salt spray)MIL-STD-202, Method 101, Condition B
VibrationMIL-STD-202, Method 204, Condition D
ShockMIL-STD-202, Method 213, Condition I
Thermal ShockMIL-STD-202, Method 107, Condition B
Moisture ResistanceMIL-STD-202, Method 106, Less Step 7B
Barometric Pressure (Altitude)MIL-STD-202, Method 105, Condition C, 70k Ft.

SMPM

Impedance (Ω)50
Frequency GHz65 GHz
Shielding Effectiveness≥ -80 dB DC - 3 GHz
 ≥ -65 dB 3 - 26.5 GHz
Dielectric withstanding Voltage325 VRMS
Mating Cycles - SB500
Mating Cycles - FD100
Insertion Force - SB2.5 lbs
Insertion Force - FD4.5 lbs
Withdrawal Force - SB1.5 lbs
Withdrawal Force - FD6.5 lbs
Axial Misalignment.010” Max
Radial Misalignment3° Max
Temperature Rating-65°C to +165°C
Corrosion (salt spray)MIL-STD-202, Method 101, Condition B
VibrationMIL-STD-202, Method 204, Condition D
ShockMIL-STD-202, Method 213, Condition I
Thermal ShockMIL-STD-202, Method 107, Condition B
Moisture ResistanceMIL-STD-202, Method 106, Less Step 7B
Barometric Pressure (Altitude)MIL-STD-202, Method 105, Condition C, 70k Ft.

Application Note

SMPM Spring Bullet Application Note

Product Video

Filters
per page
Part #   1112-4144

SMP Female to Female Bullet, Spring Loaded (OAL 0.650")

Available Inventory: 1
1112-4144
SMP Adapters 1112-4144
Datasheet
Part #   1112-4145

SMP Female to Female Bullet, Spring Loaded (OAL 0.725")

Available Inventory: 110
1112-4145
SMP Adapters 1112-4145
Datasheet
Part #   1112-4146

SMP Female to Female Bullet, Spring Loaded (OAL 0.800")

Available Inventory: 98
1112-4146
SMP Adapters 1112-4146
Datasheet
Part #   1112-4147

SMP Female to Female Bullet, Spring Loaded (OAL 0.875")

Available Inventory: 166
1112-4147
SMP Adapters 1112-4147
Datasheet
Part #   1112-4148

SMP Female to Female Bullet, Spring Loaded (OAL 0.950")

Available Inventory: 33
1112-4148
SMP Adapters 1112-4148
Datasheet
Part #   1132-4006

SMPM Female to Female Bullet, Spring Loaded (OAL 0.412")

Available Inventory: 602
1132-4006
SMPM Adapters 1132-4006
Datasheet
Part #   1132-4113

SMPM Female to Female Bullet, Spring Loaded (OAL 0.600")

Available Inventory: 223
1132-4113
SMPM Adapters 1132-4113
Datasheet
Part #   1132-4114

SMPM Female to Female Bullet, Spring Loaded (OAL 0.690")

Available Inventory: 140
1132-4114
SMPM Adapters 1132-4114
Datasheet
Part #   1132-4115

SMPM Female to Female Bullet, Spring Loaded (OAL 0.780")

Available Inventory: 116
1132-4115
SMPM Adapters 1132-4115
Datasheet
Part #   1132-4116

SMPM Female to Female Bullet, Spring Loaded (OAL 0.870")

Available Inventory: 16
1132-4116
SMPM Adapters 1132-4116
Datasheet
Part #   1132-4117

SMPM Female to Female Bullet, Spring Loaded (OAL 0.960")

Available Inventory: 199
1132-4117
SMPM Adapters 1132-4117
Datasheet
Filters Clear All