Ultra Low Profile U.FL to VITA Cable Assemblies

Picture for category Ultra Low Profile U.FL to VITA Cable Assemblies

SV's Ultra Low Profile U.FL-to-VITA Cable Assemblies deliver a compact, high-performance RF interconnect solution designed for dense VPX plug-in card systems and precision test environments. These 6-inch assemblies pair a VITA 67.3 interface — available in NanoRF, SMPM, or SMPS series — with an ultra-miniature U.FL connector featuring a 2.5 mm mated height and 0.079" (2.0 mm) width. The result is a streamlined, space-saving connection that enables direct, low-loss routing from the VITA block to the PCB, optimizing signal integrity in high-frequency applications up to 6 GHz.

Features/Benefits:

  • Ultra-low 2.5mm mated height (U.FL connector)
  • Narrow 0.079" connector width (U.FL connector)
  • Flexible, compact 6" cable length for tight routing
  • Available with VITA 67.3 connector series 
  • DC - 6 GHz

Applications:

  • VPX Plug-In Cards for VITA 67.3
  • Embedded Systems
  • High-density RF modules and assemblies
  • Test and Measurement setups 

The specifications below are typical for the connector series, but may not apply to this particular part. Please see the datasheet for full specifications.

 

U.FL

 

 Impedance (Ω)  50
 Frequency GHz  DC to 6 GHz
 Shielding Effectiveness  Typically > 50 dB @ 1 GHz
 VSWR  ≤ 1.3:1 max (DC–3 GHz), ≤ 1.4:1 max (DC–6 GHz)
 Dielectric Withstanding Voltage  200 V RMS for 1 minute
 Mating Cycles  30 Minimum
 Mating Torque  7 - 10 in - lbs
 Insertion Force  3.5 lbs
 Withdrawal Force  1.5 lbs
 Temperature Rating  −40 °C to +90 °C
 Corrosion (salt spray)  MIL-STD-202 Method 101, Condition B
 Vibration  MIL-STD-201
 Shock  MIL-STD-202, Method 213, Condition A
 Thermal Shock  MIL-STD-202 Method 107, Condition A
 Moisture Resistance  MIL-STD-202 Method 103, Condition B

 

VITA SMPM

 

 Impedance (Ω)  50
 Frequency GHz  40 GHz
 Shielding Effectiveness  ≥ -100 dB, DC to 26.5 GHz
 Dielectric withstanding Voltage  325 VRMS
 Mating Cycles  500
 Insertion Force  2.5 lbs (per contact)
 Withdrawal Force  1.5 lbs
 Temperature Rating  -65°C to +165°C
 Corrosion (salt spray)  MIL-STD-202, Method 101, Condition B
 Vibration  MIL-STD-202, Method 204, Condition D
 Shock  MIL-STD-202, Method 213, Condition I
 Thermal Shock  MIL-STD-202, Method 107, Condition B
 Moisture Resistance  MIL-STD-202, Method 106, Less Step 7B
 Barometric Pressure (Altitude)  MIL-STD-202, Method 105, Condition C, 70k Ft.

 

VITA SMPS

 

 Impedance (Ω)  50
 Frequency GHz  65 GHz
 Shielding Effectiveness  ≥ -100 dB, DC to 26.5 GHz
 Dielectric withstanding Voltage  250 VRMS
 Mating Cycles  500
 Insertion Force  1.2 lbs (per contact)
 Withdrawal Force  1.0 lbs
 Temperature Rating  -65°C to +165°C
 Corrosion (salt spray)  MIL-STD-202, Method 101, Condition B
 Vibration  MIL-STD-202, Method 204, Condition D
 Shock  MIL-STD-202, Method 213, Condition I
 Thermal Shock  MIL-STD-202, Method 107, Condition B
 Moisture Resistance  MIL-STD-202, Method 106, Less Step 7B
 Barometric Pressure (Altitude)  MIL-STD-202, Method 105, Condition C, 70k Ft.

 

VITA NANORF 

 

 Impedance (Ω)  50
 Frequency GHz  67 GHz
 Shielding Effectiveness

≥ -140 dB, 3 MHz to 30 MHz

≥ -120 dB, 30 MHz to 3.0 GHz

≥ -100 dB, 3.0 GHz to 30 GHz

≥ -90 dB, 30 to 67.0 GHz

 Dielectric withstanding Voltage  250 VRMS
 Mating Cycles  500
 Insertion Force  2.5 lbs (per contact)
 Withdrawal Force  0.315 lbs
 Temperature Rating -55°C to +125°C
 Corrosion (salt spray)  MIL-STD-202, Method 101, Condition B
 Vibration  MIL-STD-202, Method 204, Condition D
 Shock  MIL-STD-202, Method 213, Condition I
 Thermal Shock  MIL-STD-202, Method 107, Condition B
 Moisture Resistance  MIL-STD-202, Method 106, Less Step 7B
 Barometric Pressure (Altitude)  MIL-STD-202, Method 105, Condition C, 70k Ft.

Product Video

Filters
7083-0115
VITA Cable Assemblies 7083-0115
Datasheet
7032-10453
VITA Cable Assemblies 7032-10453
Datasheet
7038-7593
VITA Cable Assemblies 7038-7593
Datasheet
Filters Clear All